Solid Carbide High Performance Cutting Tools
for all your Production Demands


Your Competent Partner
in Precision Tool Technology

HAM Roughing End Mills...

HAM Solid Carbide Roughing End Mills particularly suited for premachining. Performs extremely well in a variety of workpiece materials. Available in 3-12 Flutes. Diameter offerings start at 0.8mm (.0315") to 32.0mm (1.259").


Tools are available uncoated and with TA-AL, TA-C or Diamond coating.
Clamping flat available upon request.


 
Copper
Non-Ferrous Metals
Graphite
Reinforced Composites
Nodular or Ductile Iron
Inconel
Haynes
Hastaloy
Aluminum
Steel
Stainless Steel
Cast Iron
Suitable Materials:
 
HAM 40-5350 / 40-5351
Engineering Data:
 
  • Roughing at Extremely High Feed
  • High Chipping Volume, up to 1.5 x D
  • Very Smooth Running & Low Vibrations During Machining
  • 45° RH Helix
  • 3 Flute
  • Diameter Tolerance h6
  • 45° Corner Chamfer
  • Special Geometry with Unequal Helix, Without Knurling Contour
HAM 40-1691
  • Roughing at Extremely High Feed
  • High Chipping Volume, up to 1.5 x D
  • Very Smooth Running & Low Vibrations During Machining
  • 27°/30° RH Helix
  • 4 Flute
  • Diameter Tolerance f10
  • 45° Corner Chamfer
  • Special Geometry with Unequal Helix and Pitch
HAM 403 / 406
  • Center Cutting
  • Flute with Knurling Contour
  • 30° RH Helix
  • 3-6 Flute
  • Diameter Tolerance f10
  • 45° Corner Chamfer
HAM 402 - Coolant
  • Center Cutting
  • Flute with Knurling Contour
  • 30° RH Helix
  • 3-6 Flute
  • Diameter Tolerance f10
  • 45° Corner Chamfer
HAM 441 ▪ HAM 443
  • Diamond Coating for Machining of Graphite on Request
  • Various Point Geometries Available on request
  • 22°-25° RH or LH Helix
  • 5-7 Flute
  • Diameter Tolerance 0.02 /-0.02
  • G-Point
  • Upcut or Downcut
  • Special Diamond Profile Teeth
HAM 445 ▪ HAM 446
  • Diamond Coating for Machining of Graphite on Request
  • Various Point Geometries Available on request
  • 22°-25° RH or LH Helix
  • 5-12 Flute
  • Diameter Tolerance 0.02 /-0.02
  • G-Point
  • Upcut or Downcut
  • Special Diamond Profile Teeth
HAM 448 ▪ HAM 449
  • Diamond Coating for Machining of Graphite on Request
  • Various Point Geometries Available on request
  • 20° RH or LH Helix
  • 5-6 Flute
  • Diameter Tolerance 0.02 /-0.02
  • G-Point
  • Upcut or Downcut
  • Special Spiral Profile Teeth with Chipbreaker
Slideshow Image 01 Slideshow Image 02 Slideshow Image 03 Slideshow Image 04 Slideshow Image 05 Slideshow Image 06 Slideshow Image 07 Slideshow Image 08 Slideshow Image 09 Slideshow Image 10 Slideshow Image 11 Slideshow Image 12
 
HAM Precision Tools
Andreas Maier, Inc.
1275 E. Wisconsin Avenue
Suite E
Pewaukee, WI 53072
T 262.691.7622
F 262.691.7643
info@hamprecision.com