Speeds & Feeds...
"NEW" Technical Brochures for Drilling and Milling
HAM proud to introduce our technical brochures for all our Drilling & Milling Products. These brochures include catalog icon translations, material and application information, speeds and feeds and our quality system.Note : Feed rates listed are starting points. With the proper setup, machine tools and holding technique, higher feeds can be achieved with excellent results.
Conversion to Inch:
- To convert VC ( meters per minute) to SFM (surface feet per minute) multiply VC by 3.28
- To convert f (mm per min) to IPR (inches per rev.) divide f by 25.4
TWIST DRILLS
30-1000 (300)30-1080 / 30-1081 (304)
30-1120 / 30-1121 (310)
30-1160 / 30-1161 (313)
30-1200 / 30-1201 (314)
30-1301
30-1320 (342)
30-1360 / 30-1361 (322)
30-1400 / 30-1401 (323)
30-1440 / 30-1441 (326)
30-1480 / 30-1481 (385)
30-1520 (328)
SUPERDRILLS
30-1621 (280)30-1701 (283)
30-1741 (285)
30-1781 (286)
30-1821 (292)
30-1861 (293)
NIRODRILLS
30-189130-1901 (270)
30-1941 (271)
MULTIDRILLS
30-1960 / 30-1961 (297)30-2000 / 30-2001 (298)
30-2040 / 30-2041 (299)
30-2080 / 30-2081 (294)
30-2120 (296)
DEEP HOLE DRILLS
30-218130-2221
30-2261
30-2301
30-2341
30-2381
30-2421
30-2461
30-2501
30-2541
30-2580
30-2620
30-2660
30-2700
30-2740
CENTER DRILLS
30-2760 (329)30-2800 (330)
30-2840 / 30-2841 (331)
30-2880 / 30-2881 (332)
COUNTERSINKERS
30-2920 / 30-2921 (337)DIAMOND CARBIDE
33-1000 (3304)33-1040 (3310)
33-1080 (3311)
33-1120 (3270)
33-1160 (3380)
33-1200 (3328)
33-1240 (3297)
33-1280 (3298)
33-1320 (3296)
REAMERS
50-1040 (510)50-1080 (516)
50-1120 (533)
50-1160 (540)
52-1000 (512)
52-1040 (6913)
52-1080 (6917)
53-1000 (3552)
CARBIDE ENDMILLS
40-1000 / 40-1001 (491)40-1040 / 40-1041 (480/482/484)
40-1080 / 40-1081 (410)
40-1160 / 40-1161 (421)
40-1200 / 40-1201 (412)
40-1240 (425)
40-1280 / 40-1281 (401)
40-1320 / 40-1321 (434)
CARBIDE FINISHING ENDMILLS
40-1360 / 40-1361 (435)40-1400 / 40-1401 (430)
40-1440 / 40-1441 (400)
40-1480 / 40-1481 (404)
40-5151 (407/408)
40-5181
40-1520 / 40-1521 (405)
40-1560
40-5110 / 40-5120 (409)
40-5130 / 40-5140 (409)
40-1560 / 40-1561 (432)
40-1571
40-5200/40-5220 (436)
40-5240 / 40-5260 (438)
40-5380 / 40-5320
CARBIDE ROUGHING ENDMILLS
40-5350 / 40-535140-1691
40-1680 / 40-1681 (403)
40-1720 / 40-1721
40-1581 (441)
40-1590 (443)
40-1600 (445)
40-1610 (446)
40-1620 (448)
40-1630 (449)
CARBIDE TORIC ENDMILLS
40-5400 / 40-5420 (486)40-5460
40-5480
40-6120
40-6130
40-5360 (417)
40-5600
40-5500
40-5520 / 40-5560 (418/419)
CARBIDE SPECIAL ENDMILLS
40-1880 (462)40-1921 (466)
40-1961 (467)
40-2001 (468)
40-2041 (465)
DIAMOND ENDMILLS
43-1000 (3460)43-1040 (3462/3463)
43-1080 (3464/3465/3466)
40-5640
40-6040
